Let's find the volume of a solid whose base is the region bounded by y=x,y=−x and x=4, where every cut perpendicular to the x-axis gives a square.
A cut at one x stands on the same segment we'd use for a thin rectangle when finding the area of the base, from the bottom curve to the top curve. The face of the cut is called a cross section, and here it's a square standing on that segment.
1−(−1)22x−(−x)(2x)2=2=4=2x=4x
Squaring both the 2 and the x gives 4x, not 2x. Next, we give each square a thickness dx and add up the slices.
Find the volume of a solid with square cross sections on the region between y=x,y=−x, and x=4
y=x
y=−x
x=4
x
Text solution
One thin sliceBetween cuts at x and x+dx, the square barely changes, so the slice is nearly a prism: face area times thickness.
(2x)2dx=4xdx
Add the slices from 0 to 4The curves meet at x=0, and the base ends at x=4.
V=∫044xdx=[2x2]04=32
Compare this with the area of the base. Both integrals use the same segment, the same thickness dx and the same bounds. The only difference is what multiplies dx: the segment's length for area, and the square's area for volume.
Area of the base
∫042xdx=[34x23]04=332
Volume of the solid
∫04(2x)2dx=∫044xdx=[2x2]04=32
Nothing here required the cross section to be a square. Any shape works the same way, as long as we know its area at each x.
V=∫ab(area of the cross section at x)dx
V=∫ab(area of thecross section at x)dx
2
Finding the bounds and the side length
Now let's change the base to the region between y=2x and y=x2, still with square cross sections perpendicular to the x-axis. Each square stands on the segment between the two curves, so we find its side first, top minus bottom, and then square that whole length.
x=1:2−1=1,12=1
2x−x2,(2x−x2)2
Find the volume of a solid with square cross sections on the region between y=2x and y=x2
y=2x
y=x2
x
y
Text solution
The boundsThe base starts and stops where the two curves intersect.
2x=x2→x(x−2)=0→x=0,x=2
Side first, then squareSquaring each curve before subtracting gives the wrong area. At x=1,(2x)2−(x2)2 gives 4−1=3, not the square's area 1.
(2x−x2)2=4x2−4x3+x4
Integrate
V=∫02(4x2−4x3+x4)dx
=[34x3−x4+5x5]02=332−16+532=1516
3
Triangles and semicircles
On the region between y=x and y=−x, square cross sections gave a volume of 32. What if the cross sections are semicircles or triangles instead?
The segment across the base at x goes from −x to x, so its length is 2x. Let's call that length s. When a problem says a leg, a hypotenuse, or a diameter is "in the base," it means the leg, hypotenuse, or diameter lies on this segment of length s.
Drawing both diagonals of the square on that segment cuts it into four equal triangles, and the bottom one has its hypotenuse on the segment. Drawing just one diagonal cuts the square in half, leaving a triangle with a leg on the segment.
2s
s
s
Square
s2
Hypotenuse in the base
41s2
Leg in the base
21s2
For a semicircle with its diameter on the segment, the segment of length s is the whole diameter, not the radius. So the radius is 2s.
2s
s
r21π(2s)2=2s=8πs2
For an equilateral triangle of side s, half of it is a right triangle with hypotenuse s and base 2s, so the Pythagorean theorem gives its height.
23s
s
s2−(2s)221⋅s⋅23s=23s=43s2
In each case, the area is a constant times s2. A constant comes out of the integral, and the integral left is the volume with squares, 32. So each shape's volume is its constant times 32.
∫0441(2x)2dx=41∫04(2x)2dx=41⋅32=8
21⋅32=16
8π⋅32=4π
43⋅32=83
Find the volume on the same base when cross sections are triangles, semicircles, or rectangles of height x
y=x
y=−x
x=4
x
Text solution
Triangles and semicirclesEach volume is the shape's constant times the volume with squares, as in the card above.
8π⋅32=4π
A rectangle of height xIts height is x, not a fixed fraction of s, so its area isn't a constant times s2, and we integrate it directly.
2x⋅x=2x23
V=∫042x23dx=[54x25]04=5128
How does the cross section's area change when you put a different edge on the base?
4
Semicircles on a disk
Now let's find the volume when the base is the disk x2+y2≤4, and each cross section perpendicular to the x-axis is a semicircle with its diameter in the base. The segment across the disk at x runs from the bottom half of the circle to the top half.
x2+y2=4→y=±4−x2
4−x2−(−4−x2)=24−x2
That whole segment is the diameter, so the radius is half of it. Squaring the radius gets rid of the square root.
r21π(4−x2)2=4−x2=2π(4−x2)
Find the volume of a solid whose base is the disk x2+y2≤4 and whose cross sections perpendicular to the x-axis are semicircles
x2+y2≤4
x
Text solution
Integrate from −2 to 2The two halves of the circle meet where 4−x2=0, at x=−2 and x=2.
V=2π∫−22(4−x2)dx=2π⋅332=316π
Check with half a ballThe semicircles together make the top half of a ball of radius 2.
21⋅34π⋅23=316π
Radius, not diameterUsing the whole segment 24−x2 as the radius makes every area four times as large, and the volume comes out to 364π, two whole balls instead of half of one.
5
Slicing perpendicular to the y-axis
On the base between y=x,y=−x, and x=4, squares perpendicular to the x-axis gave a volume of 32. Now let's stand the squares on the same base perpendicular to the y-axis instead.
Each cut now happens at one value of y, so the segment it stands on is horizontal, from the left edge of the base to the right edge. To find its length, we need both edges as x in terms of y. Squaring y=x and y=−x gives x=y2, so the top and bottom curves join into one curve on the left, and x=4 is the straight edge on the right.
y=x,y=−x→x=y2
Left edge
x=y2
Right edge
x=4
At height y, the side of the square is the right x minus the left x, and it shrinks to 0 where the two edges meet.
x=y2
x=4
3
x
y
1
−1
2
−2
1
4−12324−y2=3=9
y2=4→y=−2,y=2
Find the volume of the solid with squares perpendicular to the y-axis on the region between x=y2 and x=4
y=x
y=−x
x=4
x
Text solution
Square the side, thickness dyEach slice is the square's area times dy.
V=∫−22(4−y2)2dy
=∫−22(16−8y2+y4)dy
Use the symmetryEvery power of y is even, so the square at −y matches the square at y. We integrate from 0 to 2 and double.
2[16y−38y3+5y5]02=2(32−364+532)=15512
The base is the same as before, and its area is 332 whether we slice it in dx or in dy. For area, the direction of slicing is just a choice of method. For volume, it changes the solid itself.
Perpendicular to the x-axis
∫042xdx=332
∫04(2x)2dx=32
Perpendicular to the y-axis
∫−22(4−y2)dy=332
∫−22(4−y2)2dy=15512
Perpendicular to the x-axis, the side was 2x, and the largest square, with side 4, stood at the edge x=4. Perpendicular to the y-axis, the side is 4−y2, and the largest square stands in the middle, at y=0. The squares stand on different segments of the base, so they add up to a different volume.
Do square cross sections on the same base always give the same volume?
Summary
Volume by slicing
2x
4x
dx
V=∫ab(area of the cross section at x)dx
V=∫ab(area of thecross section at x)dx
Think of a thin slice of thickness dx. Its volume is the area of its cross-sectional face times its thickness. Integrating from a to b adds up all the slices across the solid.
Finding the side length and bounds
Perpendicular to the x-axis
side=top−bottom,dx
Perpendicular to the y-axis
side=right−left,dy
Across a disk
x2+y2≤r2:
r2−x2−(−r2−x2)=2r2−x2
For cross sections perpendicular to the x-axis, the side length across the base is the top y minus the bottom y, and the thickness is dx. For squares, the area is (top−bottom)2, not top2−bottom2.
For cross sections perpendicular to the y-axis, write both boundaries as x in terms of y. The side length is the right x minus the left x, the thickness is dy, and the bounds are the y-values where the region begins and ends. Cutting perpendicular to the y-axis instead of the x-axis can make a different solid with a different volume. On the region between y=±x and x=4, squares perpendicular to the x-axis give a volume of 32, while squares perpendicular to the y-axis give 15512.
For a disk x2+y2≤r2, the segment spans both halves of the circle, from −r2−x2 up to r2−x2, so its full length is 2r2−x2.
Cross-section shapes on a segment s
s
s
2s
s
Square
s2
Hypotenuse in the base
41s2
Leg in the base
21s2
Semicircle with diameter s
8πs2
Equilateral triangle
43s2
Rectangle of height h
s⋅h
When a cross section keeps the same shape and only its size changes with the length s across the base, its area is a fixed fraction of s2. Because that fraction is a constant, we can pull it out of the integral, so the solid's volume is that same fraction times the volume with squares on the same base. For example, on the base between y=x and y=−x, the volume with squares is 32, so isosceles right triangles with their hypotenuse in the base give 41⋅32=8.
If a dimension doesn't scale with s, like a rectangle with a given height h, multiply s by h and integrate that area directly.
6
Practice
Enter exact values.
1
The base of a solid is the region between y=x and the x-axis for 0≤x≤4. Cross sections perpendicular to the x-axis are equilateral triangles. Find the volume of the solid.
At each x, the top curve is y=x. What is the bottom curve?
What is the area of an equilateral triangle with side length s?
If you got 83 Check the bottom curve. The region stops at the x-axis, y=0, not y=−x.
Side length on the baseThe top curve is y=x and the bottom is the x-axis, y=0.
x−0=x
Cross-sectional areaAn equilateral triangle with side s has area 43s2.
43(x)2=43x
Integrate for volumeNow integrate that area from x=0 to x=4.
V=43∫04xdx=43⋅8=23
2
The base of a solid is the region between y=x and y=x2. Cross sections perpendicular to the x-axis are semicircles with diameters in the base. Find the volume of the solid.
Where do the curves y=x and y=x2 intersect?
The segment across the base is the diameter, x−x2. What is the radius?
If you got 60π Check the radius. The segment x−x2 is the diameter, so the radius is 2x−x2.
Find the boundsSet the two equations equal to find where the curves intersect.
x=x2→x(x−1)=0→x=0,x=1
Cross-sectional areaAt x=21,y=x gives 21 and y=x2 gives 41, so y=x is on top across the whole region, and the diameter is x−x2. Halve the diameter to get the radius, then use the area of a semicircle, 21πr2.
x−x2
r=2x−x2
8π(x−x2)2
Integrate for volumeExpand the square and integrate from x=0 to x=1.
The base of a solid is the region between y=x2−1 and y=3. Cross sections perpendicular to the x-axis are isosceles right triangles with the hypotenuse in the base. Find the volume of the solid.
The top curve is y=3 and the bottom curve is y=x2−1. What is the distance between them?
When an isosceles right triangle has its hypotenuse s on the base, what is its area in terms of s?
If you got 15256 Check the formula for the triangle's area. When the hypotenuse lies in the base, the area is 41s2, not 21s2.
Bounds and hypotenuse lengthThe curves intersect where x2−1=3, and top minus bottom gives the length of the hypotenuse in the base.
x2−1=3→x=−2,x=2
3−(x2−1)=4−x2
Cross-sectional areaAn isosceles right triangle with hypotenuse s has height 2s, so its area is 21⋅s⋅2s=41s2.
41(4−x2)2
Integrate for volumeExpand the square and integrate from x=−2 to x=2.
V=41∫−22(16−8x2+x4)dx=41⋅15512=15128
4
The base of a solid is the region between y=2x and y=x2. Cross sections perpendicular to the y-axis are squares. Find the volume of the solid.
The cross sections are perpendicular to the y-axis. What is each curve written as x in terms of y?
Set the two expressions for x equal. What are the bounds in y?
If you got 38−582 Check your integration bounds. The cross sections are perpendicular to the y-axis, so the bounds are the y-values from 0 to 4, not the x-values.
Curves in terms of yThe cross sections are perpendicular to the y-axis, so solve each equation for x.
y=2x→x=2y
y=x2→x=y
Side length on the baseAt y=1,y is farther right than 2y, so take right minus left.
y=1:21<1=1
y−2y
Bounds in ySet the two expressions equal to find where the curves intersect.
y=2y→y=0,y=4
Integrate for volumeSquare the side length to get the cross-sectional area, then integrate from y=0 to y=4.
On this same base, squares perpendicular to the x-axis give a volume of 1516, which is double our 158. Slicing in the other direction makes a different solid.
5
The base of a solid is the disk x2+y2≤9. Cross sections perpendicular to the x-axis are squares. Find the volume of the solid.
Solve x2+y2=9 for y. What are the top and bottom curves?
The square has side length 29−x2. What is its area?
If you got 36 Check the chord length. The segment across the base runs all the way from −9−x2 to 9−x2, which is 29−x2, not just 9−x2.
Side length on the baseThe chord runs from the bottom half of the circle to the top half, so subtract the two y-values.
y=±9−x2
9−x2−(−9−x2)=29−x2
Cross-sectional areaSquare the full chord length to get the area of the square.
(29−x2)2=4(9−x2)
Integrate for volumeThe circle has radius 3, so integrate the cross-sectional area from x=−3 to x=3.
V=∫−334(9−x2)dx=4[9x−3x3]−33=4⋅36=144
6
A log is 12 feet long. Its cross sections perpendicular to its length are circles. The table gives the diameter d, in feet, at x feet from one end. xd01.522436483102121.5 Use a midpoint sum with three intervals of equal length to estimate the volume of the log.
x024681012d1.5234321.5
Divide the 12-foot log into 3 intervals of length 4. What are the midpoints?
The table gives the diameter d. What is the radius r, and what is the area of a circle with that radius?
If you got 96π Check whether you used the diameter as the radius. Divide each diameter by 2 before computing πr2.
Intervals and midpointsDivide the 12-foot length into 3 equal intervals of width 4, and read the diameter at each midpoint from the table.
[0,4],[4,8],[8,12]:xd=2,6,10=2,4,2
Cross-sectional areasHalve each diameter to get the radius, then find the area of the circle, πr2.
r=1,2,1→πr2=π,4π,π
Midpoint sumMultiply each cross-sectional area by the interval width of 4 and add them together.