To find the area under a curve y=f(x) from x=a to x=b, we cut the region into thin vertical rectangles of height f(x) and width dx, and add up their areas with ∫abf(x)dx.
Now take that same region and rotate it around a line. As it turns, it sweeps out a solid. We want to find its volume.
2
From rectangles to disks
When we rotate the region under y=f(x) around the x-axis, it sweeps out a solid. To find its volume, let's do what we did for area: take one thin rectangle at x, with height f(x) and width dx, and spin it around the axis.
The rectangle sweeps out a thin disk, and the disks from x=a to x=b fill out the solid. So the steps for volume line up with the steps for area:
One rectangle
area=f(x)dx
One disk
volume=π(f(x))2dx
Add them up
A=∫abf(x)dx
V=∫abπ(f(x))2dx
Find the volume when the region under y=f(x) from x=a to x=b spins about the x-axis
Text solution
The height becomes the radiusThe rectangle reaches from the axis up to the curve, so its face is a circle of radius f(x).
area of the face=π(f(x))2
The width becomes the thicknessThe face times the thickness dx is the volume of one disk, and the integral adds the disks from a to b.
volume=π(f(x))2dx
Let's use it on the region under y=x2. The bounds 0 and 2 are given, so the only thing to find is the radius.
Find the volume when the region under y=x2 from x=0 to x=2 spins about the x-axis
Text solution
The radiusThe rectangle at x reaches from the x-axis up to the curve.
r=x2
Add up the disksEach disk has volume π(x2)2dx=πx4dx.
V=π∫02x4dx=532π
3
Finding the bounds and the radius
Earlier, the bounds were given to us. When they aren't, the disks begin and end where the region begins and ends. For the region between y=4−x2 and the x-axis, that's where the parabola intersects the axis.
region between y=4−x2 and the x-axisabout the x-axis:V=?
region between y=4−x2and the x-axisabout the x-axis:V=?
On the x-axis, y is 0, so we set 4−x2 equal to 0.
4−x2=0→x=−2,x=2
In the same way, a region bounded by a vertical line x=c ends at that line, and two curves y=f(x) and y=g(x) intersect where f(x)=g(x). Now let's find this volume, and see what happens to the radius when the region lies below the x-axis or crosses it.
Rotate regions about the x-axis when the region is above, below, or across the axis
Text solution
The radiusAt each x, the rectangle goes from y=0 up to the curve.
r=4−x2
Square the radius carefully(4−x2)2 is 16−8x2+x4, not 16−x4. Keep the middle term.
V=π∫−22(16−8x2+x4)dx
=π[16x−38x3+5x5]−22=15512π
A region below the axis
Reflect the region below the x-axis, between y=x2−4 and the axis. Now y is negative, but a radius is a distance, so we measure from the curve up to the axis.
x=1:r=0−(−3)=3
r=0−(x2−4)=4−x2
That's the same radius as before, so the disks are the same, and the volume is still 15512π.
A region across the axis
For the region between y=4−x2 and y=x2−4, the rectangle has a piece of length 4−x2 above the axis and 4−x2 below it. After half a turn, the top piece covers the space the bottom piece was in, so both sweep out the same disk. The full length is the diameter, not the radius.
r=21⋅2(4−x2)=4−x2
If we halve the top curve to y=24−x2, the pieces at x=1 have lengths 1.5 and 3. Both turn around the same point on the x-axis, so the disk of radius 1.5 lies inside the disk of radius 3 and adds no volume.
Between −2 and 2, the bottom piece is always the longer one:
24−x2<4−x2(−2<x<2)→r=4−x2
24−x2<4−x2(−2<x<2)→r=4−x2
At every x, the radius is the distance from the axis of rotation to the farthest edge of the rectangle. In all three cases, that distance is 4−x2, so all three solids have volume 15512π.
When a rectangle crosses the axis, what determines the disk’s radius?
4
Rotating about the y-axis
Now let's spin a region around the y-axis instead: the region between y=x2, the y-axis and y=4, with x≥0. To make disks around the y-axis, the rectangles have to be horizontal, running from the y-axis out to the curve. The disks stack up the y-axis, so each one has thickness dy, and everything in the integral is in terms of y.
Thickness
dy
Radius
y=x2,x≥0→r=x=y
Bounds
0≤y≤4
Find the volume when the region between y=x2, the y-axis and y=4, with x≥0, rotates about the y-axis
y=x2
y=4
x
y
Text solution
The radius in terms of yThe radius is the curve's x-coordinate at height y. Solving y=x2 gives x=±y, and the region has x≥0.
r=y,π(y)2dy=πydy
Stack the disks from 0 to 4The lowest disk is at the origin and the top one is at the line y=4.
V=π∫04ydy=8π
5
Rotating about other lines
When the axis of rotation is a line like y=4 or x=2, the radius of each disk is still the distance from the axis to the curve.
A horizontal axis y=4
Let's take the region from earlier, between y=x2, the y-axis and y=4, but spin it around its top edge, the line y=4. The axis is horizontal, so the rectangles are vertical, with thickness dx. Each one hangs from the axis down to the curve. At x=1, that's from y=4 down to y=1.
x=1:r=4−1=3
r=4−x2
Find the volume when the region between y=x2, the y-axis and y=4 rotates about y=4
y=x2
y=4
x
y
Text solution
The boundsThe region starts at the y-axis and ends where the curve meets the axis y=4.
x2=4→x=2,0≤x≤2
Square the radius and integrateAs before, (4−x2)2=16−8x2+x4.
V=π∫02(16−8x2+x4)dx
=π[16x−38x3+5x5]02=15256π
A vertical axis x=2
Now let's spin the region between y=1 and y=x2, for 1≤x≤2, around the line x=2. The axis is vertical, so the rectangles are horizontal, with thickness dy, and everything is in terms of y. At height y, the rectangle reaches from the curve at x=y across to the axis at x=2.
y=2.25:x=1.5,r=2−1.5=0.5
y=2.25:x=1.5r=2−1.5=0.5
r=2−y,dy
Find the volume when the region between y=1 and y=x2, for 1≤x≤2, rotates about x=2
y=x2
y=1
x
y
Text solution
The bounds in yThe region's bottom is the line y=1, not y=0, and its top is at x=2, where y=22=4.
1≤y≤4
Square the radius carefullyKeep the middle term: it's not 4−y.
(2−y)2=4−4y+y
Integrate
V=π∫14(4−4y+y)dy
=π[4y−38y23+2y2]14=π(38−611)=65π
How do we use the axis and the point to find the radius and thickness?
Summary
Choosing dx or dy
x-axis or y=c:V=∫πr2dx
x-axis or y=c:V=∫πr2dx
y-axis or x=c:V=∫πr2dy
y-axis or x=c:V=∫πr2dy
The disks stack along the axis of rotation, so their thickness runs along that axis. For a horizontal axis like the x-axis or y=c, the thickness is dx, and everything in the integral is in terms of x. For a vertical axis like the y-axis or x=c, the thickness is dy, and everything is in terms of y.
Finding the radius
y=x2−4,x=1:r=0−(−3)=3
y=x2−4,x=1:r=0−(−3)=3
parts 1.5 and 3:r=3
The radius is the distance from the axis of rotation to the edge of the rectangle farthest from the axis, so it's never negative. When a rectangle lies below the axis, we measure from the curve up to the axis, as in 0−(−3)=3 for y=x2−4 at x=1. When a rectangle reaches across the axis, use the longer part. The shorter part sweeps out a smaller disk that lies entirely inside the larger one, so it adds no volume.
Finding the bounds
y=4,y=x2→x=2
8−2x2=x2−4→x=±2
The bounds are the positions of the first and last disk along the axis. If the region just stops at a vertical boundary like x=c, and you're integrating with dx, then c is one of your bounds. If you're integrating with dy, a horizontal boundary like y=c gives a bound at c. Where a line intersects a curve, plug the line's value into the curve's equation. If two curves intersect, set their equations equal to find where they intersect.
6
Practice
Enter exact values in terms of π.
1
The region bounded by y=2x+1, the x-axis, x=0 and x=4 is rotated about the x-axis. Find the volume of the solid.
The rectangle at x spins around the x-axis to make a disk. What is the radius of that disk?
If you got 326π Remember to square the radius in π∫r2dx.
The rectangle at x goes from the x-axis up to the curve, so the radius is 2x+1. Squaring it clears the square root.
r=2x+1,r2=2x+1
Now integrate πr2 from 0 to 4.
V=π∫04(2x+1)dx=π[x2+x]04=20π
2
The region bounded by y=2x2, the y-axis and y=8, with x≥0, is rotated about the y-axis. Find the volume of the solid.
At height y, how far is the curve y=2x2 from the y-axis?
If you got π Check your bounds. The integral is with respect to y, so use the bounds in y, not x.If you got 32π Check your formula for x in terms of y. Remember to divide by 2 before taking the square root.
Find the radiusThe axis of rotation is the y-axis, so we use horizontal rectangles of thickness dy. Solve for x in terms of y to get the distance from the y-axis to the curve.
y=2x2,x≥0→x=2y,r=2y
Find the bounds in yThe region goes from the origin at y=0 up to the line y=8.
0≤y≤8
Now integrate πr2 with respect to y.
V=π∫082ydy=π[4y2]08=16π
3
The region bounded by y=x2−1,y=−1 and x=2 is rotated about the line y=−1. Find the volume of the solid.
A vertical rectangle at x goes from y=−1 up to y=x2−1. What is its length?
If you got 1546π Check where you measured the radius from. The axis of rotation is the line y=−1, not the x-axis.
Find the boundsThe region starts on the left where the curve intersects the line y=−1.
x2−1=−1→x=0,0≤x≤2
Find the radiusThe radius is the distance from the axis of rotation y=−1 up to the curve, so subtract the bottom y from the top y.
r=(x2−1)−(−1)=x2
Now integrate πr2 from 0 to 2.
V=π∫02x4dx=532π
Shifting the region and the axis up by 1 gives the exact same volume as rotating y=x2 about the x-axis.
y=x2−1,y=−1+1y=x2,y=0
4
The region bounded by y=(x+1)3,x=−1 and y=8 is rotated about the line x=−1. Find the volume of the solid.
At height y, how far is the curve from the vertical line x=−1?
If you got 516π Measure the radius from the axis of rotation x=−1, not from the y-axis.
Solve for xRotating about the vertical line x=−1 means our rectangles are horizontal, so we solve for x in terms of y.
y=(x+1)3→x=3y−1
Find the radiusThe radius is the distance from the axis line x=−1 across to the curve, so subtract the left x from the right x.
r=(3y−1)−(−1)=3y
Find the bounds in yThe bottom of the region is where x=−1 intersects the curve, and the top is the line y=8.