When a particle moves on a line, s(t) gives its position at time t. In the plane, a point needs two numbers to say where it is, so we use two functions instead of one, x(t) for the horizontal position and y(t) for the vertical position. We call t the parameter, which you can think of as time, and equations like x=t2 and y=t are called parametric equations.
Each value of t gives one point (x(t),y(t)). Let's find the path these two equations trace, and how to tell whether a given point is on it.
Trace the path of x=t2,y=t for −2≤t≤2
Text solution
Join the points in order of tEach t gives one point, for example t=−2 gives (4,−2). We join the points in order of t, not from left to right, and arrows show the direction, or orientation, of the path.
Why the path turns at (0,0)y=t increases the whole time, but x=t2 decreases until t=0 and then increases again. So the point moves up the entire time, first to the left and then to the right.
x:4→0→4
y:−2→2
Here are the points, each labelled with its t. Notice that the vertical line x=1 meets the path at (1,−1) and (1,1). Because one x-value has two y-values, the path is not the graph of a function y=f(x).
You can also read the coordinates from the separate graphs of x against t and y against t. At any t, the heights on those two graphs give the x and y coordinates of the point in the plane.
To test whether a point is on the path, start with the equation that gives only one value of t. Here that's y=t, since x=t2=4 would give two cases, t=2 and t=−2. Then check the other coordinate at that t.
(4,2)
y=t=2→t=2
x=22=4✓
(1,2)
y=t=2→t=2
x=22=4=1
A horizontal segment on the graph of x(t) means x stays constant, so the point traces a vertical segment while y(t) changes. How do two coordinate graphs determine one path?
2
Eliminating the parameter
Plotting points shows us the path, but to see what curve it lies on, we look for one equation in x and y only. Getting rid of t is called eliminating the parameter, and the result is the Cartesian equation, or rectangular equation. Let's do it for the path we just traced, and for one where no interval of t is given.
Eliminate the parameter for x=t2,y=t,−2≤t≤2, and for x=t,y=t−1
Text solution
Put y in for tIn y=t,t is already by itself. Solving x=t2 instead would give t=±x, two cases.
x=t2=y2
Use the interval of tSince y=t,y stays between −2 and 2. The point (9,3) is on x=y2, but the moving point never gets there.
−2≤t≤2→−2≤y≤2
For x=t, square both sidesThat gives t=x2, so y=x2−1. A square root is never negative, so x≥0. The point (−1,0) is on the parabola, but reaching it would need t=−1.
t=x2→y=x2−1
t≥0→x≥0
On the full parabolas, each path covers only a piece. The first is the part of x=y2 where −2≤y≤2.
y=t→t=y→x=y2
−2≤t≤2→−2≤y≤2
x=y2,−2≤y≤2
The second starts at (0,−1) when t=0, and as t increases, both t and t−1 increase, so the point moves up and to the right along the right half.
t≥0→x≥0
y=x2−1,x≥0
t=0→(0,−1)
3
Using trig identities to eliminate t
Now let's find the curve traced out by x=3cost and y=2sint as t goes from 0 to 2π. Remember that on the unit circle, a point at angle t has coordinates (cost,sint), and those coordinates satisfy cos2t+sin2t=1.
x=cost,y=sintcos2t+sin2t=1→x2+y2=1
Here we take each point (cost,sint) on the unit circle and stretch it by 3 horizontally and by 2 vertically, which should give an ellipse. To find its equation, we don't need t at all. We isolate cost and sint and plug them straight into the identity.
cost=3x,sint=2y
cos2t+sin2t(3x)2+(2y)29x2+4y2=1=1=1
That's an ellipse centered at the origin, passing through (±3,0) and (0,±2). Which way does the point go around it, and does the same move work for other curves?
Find the curve x=3cost,y=2sint,0≤t≤2π
Text solution
Why not solve for t?For 0≤t≤π,t=arccos3x, and substituting leaves an inverse cosine inside a sine. It's hard to recognize the curve, and it only gives the upper half.
y=2sin(arccos3x)
Find the directionAt t=0 the point is at (3,0). Just after, sint is positive, so y increases and the point moves up, counterclockwise. From 0 to 2π it goes around once.
t=0→(3,0),t=2π→(0,2)
A shifted centerFor x=2+3cost and y=−1+3sint, isolate cost and sint before squaring. That gives a circle with center (2,−1) and radius 3.
cost=3x−2,sint=3y+1
(x−2)2+(y+1)2=9
Other identitiesFor x=sect and y=tant, the identity 1+tan2t=sec2t connects them directly.
1+y2=x2→x2−y2=1
4
Same equation, different motion
Eliminating t from each of these four pairs of equations gives x2+y2=1, so all four points stay on the unit circle. But do they trace it the same way as t goes from 0 to 2π?
Compare four motions along x2+y2=1
Text solution
Start and directionThe first t gives the start, and a slightly larger t gives the direction. For x=sint,y=cost, the point starts at the top, and x increases from 0, so it moves right, clockwise.
t=0→(0,1),t=2π→(1,0)
Count the turns(cos2t,sin2t) is the point on the unit circle at angle 2t. The angle reaches 2π when t=π, so the point goes around once by t=π and twice by t=2π.
0≤t≤2π→0≤2t≤4π
Out and back on y=x2x=cost,y=cos2t also gives y=x2. But cost goes from 1 down to −1 and back, so the point traces the arc out and back.
(1,1)→(−1,1)→(1,1)
The first two start at the same point and go opposite ways.
x=cost,y=sint
t=0→(1,0)
t=2π→(0,1)
x=cost,y=−sint
t=0→(1,0)
t=2π→(0,−1)
With x=cos2t and y=sin2t, be careful with a table of points. Each step of 2π in t moves the angle 2t by π, half a turn, so the table lands only on (1,0) and (−1,0) and makes the path look like a segment.
What can change while the circle’s equation stays the same?
5
Writing parametric equations
Earlier we took parametric equations and found the curve they trace. Now we go the other way. We know where we want the point to go, and we write equations that put it there: a segment from (1,1) to (3,5) with 0≤t≤1, a circle with centre (1,−2) and radius 2 traced once clockwise from (3,−2), and y=x2 from (0,0) to (2,4).
Write parametric equations for a segment, a circle, and y=x2
Text solution
The segment: start plus t times the changeFrom start to end, x increases by 3−1=2 and y by 5−1=4. With t from 0 to 1,t is the fraction of the way along.
x=1+2t,y=1+4t
The circle: centre plus radius times cost and sintx=1+2cost,y=−2+2sint starts at (3,−2) but moves up, counterclockwise. To go clockwise, y has to decrease first, so the sine term gets a minus sign.
x=1+2cost
y=−2−2sint
0≤t≤2π
A graph y=f(x): let x=tThen y=t2, and since x goes from 0 to 2, so does t.
x=t,y=t2,0≤t≤2
Halfway along the segment, at t=21, the point is at (2,3), the midpoint.
x:3−1=2,y:5−1=4
xy=1+2t=1+4t0≤t≤1
t=0t=21t=1→(1,1)→(2,3)→(3,5)
For the circle, the first try reaches (1,0) at t=2π, above the start. With the minus sign it reaches (1,−4), straight below the centre, so the point moves clockwise.
Two particles move at the same time, from t=0 to t=3. If their paths cross, does that mean the particles collide?
Find where the paths of (t,t2) and (4−t,10−3t) intersect for 0≤t≤3, and whether the particles collide
Text solution
Find where the paths intersectEliminate t for each particle, then set the two equations equal.
A:y=x2
B:t=4−x→y=3x−2
x2−3x+2=0→(1,1),(2,4)
Check the time at each pointThe equations y=x2 and y=3x−2 have no t in them, so they tell us where the paths go, not when each particle gets there. A collision needs both particles at the same point at the same t.
(2,4):A:t=2,B:t=2
(1,1):A:t=1,B:t=3
So the particles collide at (2,4), at t=2. At (1,1), particle A is there at t=1, but particle B doesn't arrive until t=3.
Each value of t gives one point (x(t),y(t)). To draw the curve, connect the points in order of increasing t, and draw arrows along the path to show its direction. Include values of t where either coordinate changes between increasing and decreasing, such as t=0 for x=t2. At any t, the heights of the graphs of x(t) and y(t) give the coordinates of the point on the path. To test a point (a,b), solve whichever equation gives a single value for t, then plug that t into the remaining equation to see if you get the other coordinate. If the values don't match, the point is not on the curve.
Values the path covers
x=t,y=t−1y=x2−1,x≥0
To find the Cartesian equation, solve one equation for t and plug it into the other. Then check which values x(t) and y(t) can actually take, including any restrictions from a stated interval of t. For x=t, a square root is never negative, so x≥0, and the path covers only the right half of the parabola.
Eliminating the parameter with trig identities
x=3cost,y=2sintcost=3x,sint=2y→9x2+4y2=1
x=sect,y=tant1+tan2t=sec2t→x2−y2=1
When x and y are built from trig functions of the same angle t, isolate the trig functions and substitute them into a trig identity like cos2t+sin2t=1 or 1+tan2t=sec2t. If numbers are added, like x=2+3cost, isolate cost by subtracting 2 and dividing by 3 before squaring.
Start, direction, and number of trips
(cost,sint)(cost,−sint)(cos2t,sin2t)(sint,cost)
→x2+y2=1
Different parametric equations can trace the same curve in completely different ways. Plug in the first value of t to find the start, and check a slightly larger t to find the direction. On a circle, each time the angle inside sine and cosine changes by 2π, the point completes one full trip.
For a line segment with 0≤t≤1, each coordinate is its starting value plus t times its total change. For a circle, add the radius times cost and sint to the centre coordinates, and change sint to −sint to trace it clockwise. Swapping sine and cosine moves the starting point to the top of the circle. For a graph y=f(x), set x=t and y=f(t).
Collisions and intersecting paths
(2,4)(1,1):A:t=2,B:t=2:A:t=1,B:t=3
Two paths intersect where their curves share a point (x,y). For a collision, both particles must arrive at that point at the exact same time, so the same value of t must give the same x and the same y for both particles. If particle A reaches (1,1) at t=1 and particle B reaches it at t=3, their paths intersect, but the particles don't collide.
7
Practice
Enter exact values and coordinates as (x,y).
1
Does the curve x=t2−1,y=t3 pass through the point (3,−8)? If it does, at what value of t?
Which equation gives only one value of t?
If you got t=2 Check the y-coordinate. At t=2,y=23=8, not −8.
Both coordinates have to match at the same time t, and t3=−8 gives only one value of t.
y=t3=−8→t=−2
Now check whether t=−2 gives the right x-coordinate.
x=(−2)2−1=3✓→t=−2
2
A curve is given by x=t+2,y=t2−1,−1≤t≤2. (a) Eliminate the parameter to find a Cartesian equation of the curve. (b) Find the x-values the path covers. (c) Find the point where the path starts and the point where it ends.
(b)≤x≤
What are the values of x when t=−1 and t=2?
If you got −1≤x≤2 Check the x-values. The interval −1≤t≤2 is for t, and x=t+2 shifts every value by 2.
(c)start(,)end(,)
If you got start (4,3), end (1,0) Check which point comes first. The path starts at the smallest t, which is t=−1.
Eliminate the parameterSolve for t in terms of x, then plug it into y.
x=t+2→t=x−2→y=(x−2)2−1
Find the x-valuesBecause x=t+2 increases as t increases, the ends of the t-interval give the smallest and largest x.
t=−1→x=1,t=2→x=4→1≤x≤4
Find the start and end pointsThe path starts at t=−1 and ends at t=2.
t=−1→(1,0),t=0→(2,−1),t=2→(4,3)
3
A curve is given by x=sect,y=tant,−2π<t<2π. Find a Cartesian equation and the part of it the path covers.
Which identity connects sect and tant?
If you got x2+y2=1 Check the identity. The identity for sect and tant is 1+tan2t=sec2t, not cos2t+sin2t=1.
If you got x2−y2=1, both branches Check the sign of x. On −2π<t<2π,cost is positive, so x=sect can't be negative.
Eliminate the parameterUse the identity 1+tan2t=sec2t, then replace tant with y and sect with x.
1+tan2t=sec2t→1+y2=x2→x2−y2=1
Find the x-valuesOn this interval of t,cost is positive and at most 1, so its reciprocal is at least 1.
−2π<t<2π:0<cost≤1→x=cost1≥1
Trace the branchAt t=0 the point is at (1,0), and as t goes from −2π to 2π,y=tant goes from negative infinity to infinity.
t=0→(1,0),t→−2π+:y→−∞,t→2π−:y→∞
x2−y2=1,x≥1
4
The graphs of x(t) and y(t) for 0≤t≤2 are shown. Which is the path of the point (x(t),y(t))?
What are the heights on the two graphs at t=1?
If you got (C) Check which graph is x(t) and which is y(t). At t=0,x=−1 and y=0, so the point is (−1,0), not (0,−1).
Read the heights on both graphs at the same t to get (x,y).
t=0→(−1,0),t=1→(1,1),t=2→(−1,2)
Both coordinate graphs are made of straight pieces, so the path connects (−1,0) to (1,1) to (−1,2) in straight segments.
t=21→(0,21),t=23→(0,23)→(A)
5
A curve is given by x=1+3cos(πt),y=2+3sin(πt),0≤t≤1. Find the centre and radius of the circle it lies on, the points where the path starts and ends, and its direction.
centre(,)radius
start(,)end(,)
As t goes from 0 to 1, what angle does πt go through?
If you got end (4,2) Check the angle at t=1. When t=1, the angle inside sine and cosine is π, not 2π.
Find the centre and radiusIsolate cos(πt) and sin(πt), then square and add.
cos(πt)=3x−1,sin(πt)=3y−2→(x−1)2+(y−2)2=9
Find the range of the angleAs t goes from 0 to 1, the angle πt covers only half a turn.
0≤t≤1→0≤πt≤π
Find the start, end, and directionTesting t=21 shows the point passes through (1,5), so it moves counterclockwise from (4,2) to (−2,2).
t=0→(4,2),t=21→(1,5),t=1→(−2,2)
6
Which parametric equations, with 0≤t≤2π, trace the circle (x−1)2+y2=9 once clockwise, starting at (4,0)?
What point does each option give at t=0? As t increases slightly, does y increase or decrease?
If you got (A) Check the direction. At t=2π, option (A) gives (1,3), which is above (4,0), so it moves counterclockwise.
If you got (D) Check the starting point. At t=0, option (D) gives (1,3), not (4,0).
Check the start pointAt t=0,cos0=1 and sin0=0, so only options (A) and (B) start at (4,0).
t=0:(A),(B)→(4,0),(C)→(3,0),(D)→(1,3)
Check the directionClockwise from (4,0) means moving down into negative y-values.
t=2π:(A)→(1,3),(B)→(1,−3)→(B)
7
A particle moves in a straight line at a constant rate from (−2,3) at t=0 to (4,−1) at t=1. Write its position at time t, and find where it is at t=41.
x=y=
What is the total change in x, end minus start?
t=41:(,)
If you got (−27,4) Remember that total change is the end value minus the start value. For y, that's −1−3=−4, not 3−(−1).
The coefficient of t is the total change in each coordinate from t=0 to t=1.
x:4−(−2)=6,y:−1−3=−4
x=−2+6t,y=3−4t,0≤t≤1
Plug in t=41 to find the position.
t=41:x=−2+23=−21,y=3−1=2
8
For 0≤t≤3, particle A is at x=t,y=t2, and particle B is at x=3−t,y=3−t. (a) Where do their paths intersect? (b) Do the particles collide? If they do, where and when?
At the intersection point (1,1), what is t for particle A, and what is t for particle B?
If you got yes, at (1,1) Check the times. Particle A reaches (1,1) at t=1, but particle B reaches it at t=2.
Find where the paths intersectEliminate t for each particle, then find where the two curves intersect.
A:y=x2;B:y=3−t=x
x2=x→x(x−1)=0→(0,0),(1,1)
Check the times at each intersection pointA collision needs both particles to reach the same point at the same time t.
(0,0):A:t=0;B:3−t=0→t=3
(1,1):A:t=1;B:3−t=1→t=2
Check if they can collide anywhere elseFor both particles to have the same x-coordinate, t must be 23, but their y-coordinates are different at that time.
t=3−t→t=23:A:y=49,B:y=23
9
A curve is given by x=sint,y=cos2t. Find a Cartesian equation and the x-values the path covers. (Challenge)
y=≤x≤
Which double-angle identity writes cos2t in terms of sint?
If you got y=2x2−1 Check which identity you used. 2cos2t−1 is in terms of cost, but x=sint.
If you got y=1−2x2 for every x Check the restriction on x.x=sint only takes values between −1 and 1.
Eliminate the parameterUse the double-angle identity cos2t=1−2sin2t, then replace sint with x.
cos2t=1−2sin2t→y=1−2x2
Find the x-valuesBecause sint stays between −1 and 1, the path only covers that part of the parabola.