Let's find the slope of the tangent line to the curve x=t3−3t,y=t2 at t=2. Usually we'd write y in terms of x, but here that means solving a cubic for t. At x=1,t3−3t=1 has three real solutions, so the vertical line x=1 crosses the curve three times, and y isn't a single function of x.
x=1→t3−3t=1
So we need a way to find the slope without eliminating t.
Find the tangent line to x=t3−3t,y=t2 at t=2
Text solution
Divide the ratesThe slope is the rise per unit of t divided by the run per unit of t.
dtdx=3t2−3,dtdy=2t
dxdy=3t2−32t
Plug in t=2The slope is 94, and the point is (2,4).
dxdy=12−34=94
(x,y)=(8−6,4)=(2,4)
y−4=94(x−2)
Check on x=t+1,y=t2Eliminating t gives y=(x−1)2, with slope 2(x−1), which is 2t. Dividing the rates gives the same thing.
dxdy=12t=2t
Here's the picture behind that division. Over a tiny step Δt, the run and the rise both carry the same Δt, so it cancels in rise over run, just like du cancels in the chain rule dudydxdu.
t=2:dtdx=9dtdy=4→Δx≈9Δt→Δy≈4Δt
ΔxΔy≈9Δt4Δt=94
The same thing happens at every t where dtdx isn't 0, and that's the formula for the slope.
dxdy=dtdxdtdy
The formula gives dxdy as a function of t. To find the slope at a point (x,y), we need the value of t at that point.
2
Tangent lines at a given point
So what if we're given a point (x,y) on the curve instead of t? Our slope dxdy=3t2−32t takes t, so first we find which t puts us at the point. Let's try it at two points.
Find the tangent lines to x=t3−3t,y=t2 at (2,4) and at (0,3)
Text solution
At (2,4), one value of tSolving t2=4 gives t=2 or t=−2, but only t=2 also gives x=2. The other lands on (−2,4).
t=2:x=8−6=2
t=−2:x=−8+6=−2
t=2:y−4=94(x−2)
At (0,3), two values of tSolving t2=3 gives t=3 or t=−3, and factoring x shows both give x=0. The curve passes through (0,3) twice.
x=t(t2−3)=0 for t=±3
Each pass through (0,3) gets its own slope, and so its own tangent line.
t=−3:dxdy=6−23=−33y=3−33x
t=3:dxdy=623=33y=3+33x
A curve y=f(x) has only one point over each x, so it has at most one tangent line at a point. A parametric curve can come back to the same point at another value of t.
Be careful not to plug x=0 into 3t2−32t. That gives 0, which isn't the slope of either tangent line, because the slope formula takes t, not x.
3
Horizontal and vertical tangents
Where is the tangent line to our curve horizontal, and where is it vertical? Think back to the little triangle, with run about dtdxΔt and rise about dtdyΔt. With no rise the tangent lies flat, and with no run it stands straight up.
horizontal:dtdy=0,dtdx=0
vertical:dtdx=0,dtdy=0
Find where the tangent line to x=t3−3t,y=t2 is horizontal and where it is vertical
x
y
horizontal tangent:?
vertical tangent:?
Text solution
Horizontal, where the rise is 0Only t=0 makes dtdy zero, and dtdx=−3 there, so the run isn't 0.
dtdy=2t=0→t=0→(0,0)
Vertical, where the run is 0That happens at t=−1 and t=1, where dtdy is −2 and 2, so the rise isn't 0.
dtdx=3(t2−1)=0→t=±1
t=−1:(2,1)
t=1:(−2,1)
What if both rates are 0 at the same t? For x=t3,y=t2 at t=0, dividing gives 00, which doesn't tell us the slope. So we look at dxdy for t near 0.
t=0:dxdy=3t22t=3t2
t=0:dxdy=3t22t=3t2
x
y
y=x32
As t approaches 0, the size of 3t2 grows without bound, so the tangent line at (0,0) is vertical. Since t=x31, the curve is y=x32, which has a cusp there.
Which derivative is 0 at a horizontal tangent, and which is 0 at a vertical tangent?
4
Concavity and the second derivative
Remember that a curve is concave up where dx2d2y is positive, which means the slope dxdy increases as x increases from left to right. Our slope 3t2−32t is already a function of t, so it's tempting to just take its derivative with respect to t. Let's see what that gives.
Find where the curve x=t3−3t,y=t2 is concave up and concave down
x
y
concave up:?
concave down:?
Text solution
Differentiate the slope with respect to tThe quotient rule gives a derivative that's negative for every t, even though the bottom arc is a U.
dtd[3t2−32t]=−32⋅(t2−1)2t2+1
Divide by dtdx againThat turns the change per unit of t into the change per unit of x. At t=0, dividing by −3 makes it positive.
dx2d2y=−9(t2−1)32(t2+1)
t=0:dx2d2y=−3−32=92>0
Read the sign from the denominatorThe numerator −2(t2+1) is always negative, so (t2−1)3 decides. The bottom arc is concave up and the two outer arcs are concave down.
−1<t<1:dx2d2y>0
t<−1 or t>1:dx2d2y<0
Three points on the bottom arc show why that second division matters. Because dtdx=3(t2−1) is negative for −1<t<1, the point moves from right to left as t increases. In order of t, the slopes fall. Read from left to right, in order of x, they rise, so the arc is concave up.
t=−21
t=0
t=21
94
0
−94
txdxdy−218119400021−811−94
xdxdy−811−940081194
The slope dxdy is just another quantity changing with t. Dividing by dtdx turned dtdy into a rate per unit of x, and it does the same for the slope.
dxdydx2d2y=dtdxdtdy=dtdxdtd(dxdy)
A common slip is to divide the two second derivatives, but d2x/dt2d2y/dt2 isn't dx2d2y.
If the slope decreases as t increases, is the curve always concave down?
Summary
Slope of a parametric curve
dxdy=dtdxdtdy
The slope of the curve is the rise per unit of t divided by the run per unit of t. Over a short time Δt, the rise is about dtdyΔt and the run is about dtdxΔt, so Δt cancels. The formula gives dxdy as a function of t.
Tangent lines at a point
To find the tangent line at a point (x,y), solve for t using one coordinate, then keep each t that gives the other coordinate. A parametric curve can pass through the same point at more than one value of t, and every t you keep gets its own slope and tangent line.
t=−3:t=3:dxdy=−33dxdy=33
At (0,3) on x=t3−3t,y=t2, solving t2=3 gives t=3 and t=−3. Both give x=0, so the curve has two tangent lines at (0,3), with slopes 33 and −33.
The tangent line is horizontal where the rise is 0 and the run isn't, and vertical where the run is 0 and the rise isn't. Answer with the points (x,y), not just the values of t.
If dtdx and dtdy are both 0 at the same t, check what dxdy approaches for t near that value. For x=t3,y=t2 at t=0, the size of the slope 3t2 goes to infinity as t approaches 0, so the tangent line at (0,0) is vertical.
Concavity and the second derivative
dx2d2y=dtdxdtd(dxdy)
To find dx2d2y, differentiate the slope dxdy with respect to t, then divide by dtdx. A second division by dtdx is needed because the second derivative measures the change in slope per unit of x, not per unit of t. Wherever dtdx<0, that division reverses the sign.
For x=t3−3t and y=t2 at t=0,dtd(dxdy)=−32, but dividing by dtdx=−3 gives dx2d2y=92, so the curve is concave up. The second derivative isn't d2x/dt2d2y/dt2.
5
Practice
Enter exact values.
1
Find an equation of the tangent line to the curve x=2cost,y=3sint at t=6π.
What are dtdx and dtdy at t=6π?
dxdy is dtdy divided by what?
If you got y=233x−3 Check the derivative of 2cost. The derivative of cost is −sint, so dtdx is negative at t=6π.
If you got a slope of −923 Check which rate is on top. The slope dxdy is dtdy divided by dtdx, not the other way around.
Find the rates of changeDifferentiate x and y with respect to t, and evaluate each at t=6π.
dtdx=−2sint,dtdy=3cost
t=6π:dtdx=−1,dtdy=233
Find the slopeDivide dtdy by dtdx to get the slope of the tangent line.
dxdy=−1233=−233
Find the pointPlug t=6π into x and y to find the point on the curve.
(2cos6π,3sin6π)=(3,23)
Write the tangent lineUse point-slope form with the point (3,23) and slope −233.
y−23=−233(x−3)
y=−233x+6
2
Find an equation of the tangent line to the curve x=t2,y=t3+1 at the point (4,9).
If x=4, then t2=4, so t=2 or t=−2. Which of these values gives y=9?
Once you have the right t, what is dxdy at that value?
If you got y=−3x+21 Check which t gives the point (4,9). At t=−2,y is (−2)3+1=−7, not 9.
If you got y=6x−15 Check what you plugged into dxdy. The slope uses the parameter value t=2, not the coordinate x=4.
Solve for tSet the x-coordinate equal to 4 to find the possible values of t.
x=4:t2=4→t=2 or t=−2
Pick the t that gives y=9Plug both values into y to see which one gives 9.
t=2:y=8+1=9,t=−2:y=−8+1=−7
Find the slopeDivide dtdy by dtdx, and evaluate at t=2.
dxdy=2t3t2=23t;t=2:dxdy=3
Now write the line through (4,9) with slope 3.
y−9=3(x−4)→y=3x−3
3
The curve x=cost,y=sin2t,0≤t<2π, passes through the origin. Find an equation of every tangent line to the curve at the origin.
The origin has x=0. Which values of t between 0 and 2π make cost=0?
For which of those t-values is y=sin2t also 0? How many times does the curve go through the origin?
If you got only one line Check both values of t where x=0. The curve passes through the origin at t=2π and at t=23π, so there are two tangent lines.
Find when the curve passes through the originSet x=0 on 0≤t<2π, then check y at each value.
x=0:cost=0→t=2π or t=23π
t=2π:y=sinπ=0,t=23π:y=sin3π=0
Find the slope at each value of tThe curve passes through the origin at two different times, so find dxdy at each t.
dtdx=−sint,dtdy=2cos2t
t=2π:dxdy=−1−2=2,t=23π:dxdy=1−2=−2
Both lines pass through (0,0), one with slope 2 and one with slope −2.
y=2x,y=−2x
4
Find the points on the curve x=t2−4t,y=t3−3t where the tangent line is horizontal, and the points where it is vertical.
Does a horizontal tangent happen where dtdy=0 or where dtdx=0?
Once you find each value of t, plug it into x and y to find the coordinates of the point.
If you got horizontal at (−4,2), vertical at (−3,−2) and (5,2) Check which derivative belongs to which tangent. A horizontal tangent has dtdy=0, and a vertical tangent has dtdx=0.
If you got horizontal at t=±1, vertical at t=2 The problem asks for points, not values of t. Plug each t back into x and y to get (x,y).
Find the derivativesDifferentiate x and y with respect to t.
dtdx=2t−4,dtdy=3t2−3
Find the horizontal tangentsSet dtdy=0, make sure dtdx=0, and plug each t into x and y.
3t2−3=0→t=±1
t=1:dtdx=−2,t=−1:dtdx=−6
t=1:(1−4,1−3)=(−3,−2),t=−1:(1+4,−1+3)=(5,2)
Find the vertical tangentSet dtdx=0, make sure dtdy=0, and plug t=2 into x and y.
2t−4=0→t=2;dtdy=12−3=9
t=2:(4−8,8−6)=(−4,2)
5
Find the points on the cycloid x=t−sint,y=1−cost,0≤t≤2π, where the tangent line is horizontal.
Set dtdy=0 on [0,2π]. What is dtdx at each of those values?
At t=0 and t=2π, both rates are 0. What does dxdy=1−costsint approach as t→0?
If you got (0,0),(π,2) and (2π,0) Check the value of dtdx at t=0 and t=2π. Both rates are 0 there, so evaluate the limit of dxdy to see if the tangent is horizontal.
Find the rates of changeDifferentiate x and y with respect to t.
dtdx=1−cost,dtdy=sint
Check where dtdy=0Set sint=0, and check which values have dtdx=0.
sint=0→t=0,π,2π
t=π:dtdx=2=0→(π−0,1+1)=(π,2)
Check the values where both rates are 0At t=0 and t=2π, plugging in gives 00, so use L'Hôpital's rule to find the limit of the slope.
t=0,2π:dtdx=0,dtdy=0
dxdy=1−costsintL’Hoˆpitalsintcost
sintcost→∞ as t→0 and as t→2π
The tangent line is vertical at (0,0) and (2π,0), so only (π,2) has a horizontal tangent.
horizontal tangent only at (π,2)
6
For which values of t is the curve x=t2,y=t3−3t concave up?
To find dx2d2y, divide dtd(dxdy) by what?
For what values of t is 4t33(t2+1)>0?
If you got all t=0 Check whether you divided by dtdx=2t. That extra factor of t in the denominator makes the second derivative negative for t<0.
Find the first derivativeDivide dtdy by dtdx, then split the fraction into 23(t−t1) so it is easier to differentiate term by term.
dtdx=2t,dtdy=3t2−3
dxdy=2t3t2−3=23(t−t1)
Differentiate with respect to tTake the derivative of dxdy with respect to t.
dtd(dxdy)=23(1+t21)
Divide by dtdxDivide by dtdx=2t to get dx2d2y.
dx2d2y=2t23(1+t21)=4t33(t2+1)
Check the signThe numerator is always positive, so the second derivative is positive exactly when the denominator is positive.