When we rotate the line y=43x from x=0 to x=4 around the x-axis, we get the slanted outside of a cone. The flat circle at x=4 isn't part of it. Let's find this surface area, S.
For volume, we sliced the solid into thin disks of area πr2 and thickness dx. For the surface, we take one thin band around the cone at x. Its radius is 43x, so the distance around it is 2π(43x).
Cut and unrolled, the band is almost a rectangle of length 2π(43x). But its width isn't dx. Look at the cone cut in half from the side: the disk's rim is parallel to the x-axis, but the band lies along the slanted line, so while it runs dx it also rises dy.
The disk's rim has width dx, while the band along the surface has width ds.
Find the surface area when y=43x from x=0 to x=4 is rotated about the x-axis
Text solution
The width of a bandFrom arc length, ds is the hypotenuse of the triangle with legs dx and dy, and the slope is 43. The sides are in the ratio 4:3:5.
ds=1+(43)2dx=45dx
Add up the bandsEach band's area is its circumference times its width.
S=∫042π(43x)45dx=815π∫04xdx=15π
S=∫042π(43x)45dx=815π∫04xdx=15π
Why not dx?With dx in place of ds, we'd add up cylinder walls parallel to the x-axis. However thin they get, they never lie along the slanted surface, and their area is 12π, only 54 of S.
For a curve y=f(x) on or above the x-axis, the slope f′(x) can change from point to point, but the width of the band at x is always ds=1+f′(x)2dx.
band at x:2πf(x)ds
ds=1+f′(x)2dx
S=∫ab2πf(x)1+f′(x)2dx
Next to volume, the circle's area πf(x)2 becomes its circumference 2πf(x), and the thickness dx becomes the slanted width ds.
Volume
V=∫abπf(x)2dx
Surface area
S=∫ab2πf(x)ds
We can also see it from arc length: each tiny piece ds of the curve travels around a circle of circumference 2πf(x), so we multiply each ds by that circumference.
Will thinner cylinder walls give us the correct surface area?
2
Checking the formula on a sphere
Let's test the formula on a surface whose area we already know. Rotating the top half of the circle y=4−x2 from x=−2 to x=2 about the x-axis gives a sphere of radius 2, and from geometry its surface area is 4π⋅22=16π. Does the integral agree?
Find the surface area of a sphere of radius 2
Text solution
The square root in dsWriting 1 as 4−x24−x2 combines 1+f′(x)2 into one fraction.
f′(x)=−4−x2x
1+f′(x)2=4−x24
1+f′(x)2=4−x22
Multiply in the radiusThe radius cancels the root before we integrate.
4−x2⋅4−x22=2
IntegrateNo x is left inside, so the integral matches geometry.
S=∫−222π⋅2dx=16π=4π⋅22
Why does the root cancel? Compare two bands with the same run dx. At x=3, the radius is half what it is at x=0, but the surface slants more, so the width along the curve doubles. Every band on the sphere has the same area.
x=0:x=3:2π⋅2⋅dx=4πdx2π⋅1⋅2dx=4πdx
Multiplying the radius into the square root helps on other curves too. For y=x, the derivative squared is f′(x)2=4x1. Bringing the radius x inside the square root turns two separate roots into one root, x+41.
y=x:x⋅1+4x1=x+41
3
Rotating about the y-axis
Now let's rotate y=x2, from x=0 to x=2, about the y-axis instead. That sweeps out a dish, and we want its surface area.
A point (x,x2) on the curve now circles the y-axis, so its radius is the horizontal distance across to that axis, x. About the x-axis, the same point's radius would be x2.
Find the surface area when y=x2, from x=0 to x=2, is rotated about the y-axis
Text solution
Radius and dsThe radius is x. The curve hasn't changed, so ds stays in dx, even though we turn about the y-axis.
radius=x
ds=1+4x2dx
S=∫022πx1+4x2dx
SubstituteThe x from the radius is what du needs.
u=1+4x2du=8xdxx=0→u=1x=2→u=9
S=82π∫19udu=6π(27−1)=313π
About another horizontal line, like y=−1, the curve and its ds stay the same. Only the radius changes, to the distance from (x,x2) down to that line.
radius=x2−(−1)=x2+1
ds=1+4x2dx
Which part of the surface-area formula changes with the axis?
4
Choosing x or y for ds
Next, let's rotate y=3x, from x=0 to x=1, about the y-axis. This time, writing ds in dx puts x in a denominator under the root. Remember from arc length that we can factor dy out of dx2+dy2 instead.
ds=dx2+dy2=1+(dydx)2dy
Find the surface area when y=3x, from x=0 to x=1, is rotated about the y-axis
Text solution
Write ds in yIn x, the root has a fraction that's undefined at x=0. From x=y3, the root in y has no fraction at all.
ds=1+9x341dx
ds=1+9y4dy
SubstituteIn y, the radius is y3 and y runs from 0 to 1. The y3 outside the root is what du needs.
u=1+9y4du=36y3dyy=0→u=1y=1→u=10
S=362π∫110udu=27π(1010−1)
Integrating in x would give the same surface area, but the root is much simpler in y. Once we pick y, the radius and the bounds go in y too.
radius=x=y3
0≤y≤1
S=∫012πy31+9y4dy
Summary
From volume to surface area
Volume
V=∫πr2dx
Surface area
S=∫2πrds
To find volume, we add up the volumes of disks with face area πr2 and thickness dx. Surface area adds up the thin bands around the outside, so the circle's area becomes its circumference 2πr, and the flat thickness dx becomes the slanted width ds along the curve.
The band width ds
In x
ds=1+(dxdy)2dx
In y
ds=1+(dydx)2dy
A band lies on the slanted surface, so its width is a piece of arc length ds, not dx. Using dx instead of the length along the curve for the band's width adds up flat cylinder walls parallel to the axis, and that doesn't give the slanted surface area.
Finding the radius
The radius r is always the distance from the point on the curve to the axis you rotate around. For y=x2, that's x2 for the x-axis, x for the y-axis, and x2+1 for the line y=−1. The axis sets the radius, but ds belongs to the curve itself, so ds stays the same for every axis.
Choosing dx or dy
y=3x→x=y3
ds=1+9y4dy
r=y3,0≤y≤1
Choose dx or dy for ds based on which derivative gives a simpler square root, not which axis the curve rotates around. For y=3x, solving for x=y3 gives a polynomial under the square root instead of a fraction. Once ds is in y, write the radius r and the bounds in y too.
Simplifying before integrating
4−x2⋅4−x22=2
x⋅1+4x1=x+41
x1+4x2dx:u=1+4x2,xdx=8du
Before integrating, multiply the radius into the square root. For a sphere, the square root in the radius cancels the square root in the denominator completely. For y=x, bringing the radius inside leaves a single square root. In an expression like x1+4x2, the factor outside the square root can give us the xdx needed for substitution.
5
Practice
Enter exact values using fractions and π where needed.
1
Find the area of the surface obtained by rotating the curve y=2x,0≤x≤3, about the x-axis.
Surface area uses bands of width ds=1+f′(x)2dx. What is f′(x) for y=2x?
When you multiply the radius 2x into 1+x1, what is x(1+x1)?
If you got 83π Check the width of each band. The slant width is ds, not dx.If you got 364π Check the lower bound. When x=0,(x+1)23 is 1, not 0.
Slant widthFind the derivative f′(x) to set up ds=1+f′(x)2dx.
f′(x)1+f′(x)2=x1=1+x1
Combine the rootsThe radius about the x-axis is y=2x, and multiplying it into the square root clears the fraction.